Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- home_assistant:home_assistant_rezepte:wled_fortschritt [08.03.2026] – mark
+++ home_assistant:home_assistant_rezepte:wled_fortschritt [07.11.2026] (aktuell) – mark
@@ Zeile 1: / Zeile 1: @@
 ====== WLED Druckfortschritt Anzeige ======
-===== Für einen Drucker =====
+===== Für einen oder mehrere Drucker als Blueprint =====
-==== configuration.yaml ====
+Hierzu mit dem HA Editor eurer Wahl config -> blueprints -> automation einen eigenen Ordner anlegen.\\
+darin z.B. eine Datei wled_print_progress.yaml und den unteren Inhalt einfügen.
-  * wled_segment_percent: kann verändert werden, muss nur eindeutig sein.
-  * id: die ID Nr. des zu steurnden Segments, default wäre 0
-  * fx: ist die laufende Nr. der Anmiation in WLED, in diesem Fall müssen wir "Percent" nutzen
-  * bri: die Helligkeit der LEDs
-  * ix: wie viele LEDs sollen leuchten, der Wert wird dann aus der Automation (siehe unten) gesetzt
 <code>
- rest_command:
+blueprint:
-  wled_segment_percent:
+  name: WLED print progress (multi printer, rotating)
-    url: "http://172.16.10.233/json/state"
+  description: 'Shows the progress of up to 4 printers on one WLED segment (Percent
-    method: POST
+    effect). Active printers are shown one after another, each for the chosen interval,
-    headers:
+    each in its own color. Printers that are idle/offline are skipped. When no printer
-      Content-Type: application/json
+    is printing, an optional idle preset or idle effect is applied. Leave the entities
-    payload:>
+    of unused printer slots empty.
-      {
-        "seg":[
-          {
-            "id":1,
-            "on":true,
-            "fx":98,
-            "bri":100,
-            "ix":{{ ix }}
-          }
-        ]
-      }
-</code>
+    '
+  domain: automation
+  input:
+    segment_light:
+      name: WLED segment (light)
+      description: Light entity of the segment used for the progress bar (not the
+        main segment).
+      selector:
+        entity:
+          domain:
+          - light
+          integration: wled
+          multiple: false
+          reorder: false
+    intensity_entity:
+      name: WLED segment intensity (number)
+      description: Intensity entity of the same segment.
+      selector:
+        entity:
+          domain:
+          - number
+          integration: wled
+          multiple: false
+          reorder: false
+    interval:
+      name: Display time per printer (seconds)
+      default: 5
+      selector:
+        number:
+          min: 1.0
+          max: 120.0
+          unit_of_measurement: s
+          mode: box
+          step: 1.0
+    inactive_states:
+      name: States that count as "not printing"
+      default:
+      - idle
+      - offline
+      - finish
+      - unknown
+      - unavailable
+      selector:
+        text:
+          multiple: true
+          multiline: false
+    idle_preset_entity:
+      name: Idle - WLED preset selector (optional)
+      description: 'Preset select entity of the WLED device. Note: a preset applies
+        to the whole device, not just this segment. Takes priority over the idle effect.
-==== Automation erstellen ====
+        '
+      default: ''
+      selector:
+        entity:
+          domain:
+          - select
+          integration: wled
+          multiple: false
+          reorder: false
+    idle_preset_name:
+      name: Idle - preset name
+      description: Exact name of the preset to apply when no printer is printing.
+      default: ''
+      selector:
+        text:
+          multiline: false
+          multiple: false
+    idle_effect:
+      name: Idle - segment effect (optional)
+      description: 'Effect name for the progress segment when no printer is printing,
+        e.g. Rainbow. Only used if no idle preset is set. If both are empty, the segment
+        is turned off.
-Neue Automation erstellen, danach oben rechts die drei Punkte klicken und in yaml bearbeiten. \\ Dann den Inhalt ersetzen.
+        '
+      default: ''
-  * alias: kann frei vergeben weredn, sollte eindeutig sein
+      selector:
-  * entity_id: vorher aus der Bambuintegration auslesen und entsprechend anpassen oder umstellen auch "im visuaellen editior bearbeiten" und dann einfach auswählen.
+        text:
-  * actions → data → action: muss zum obigen namen unter "rest_command" passen
+          multiline: false
-  * variables → ix: hierzu die selbe id wie unter entity_id eintragen, zur Not wieder vom Editior in yaml bearbeietn wechseln.
+          multiple: false
+    p1_status:
-<code>
+      name: Printer 1 - status
-alias: WLED Druckfortschritt anzeigen
+      selector:
+        entity:
+          domain:
+          - sensor
+          multiple: false
+          reorder: false
+    p1_progress:
+      name: Printer 1 - progress (%)
+      selector:
+        entity:
+          domain:
+          - sensor
+          multiple: false
+          reorder: false
+    p1_color:
+      name: Printer 1 - color
+      default:
+      - 0
+      - 0
+      - 255
+      selector:
+        color_rgb: {}
+    p2_status:
+      name: Printer 2 - status (optional)
+      default: ''
+      selector:
+        entity:
+          domain:
+          - sensor
+          multiple: false
+          reorder: false
+    p2_progress:
+      name: Printer 2 - progress (%) (optional)
+      default: ''
+      selector:
+        entity:
+          domain:
+          - sensor
+          multiple: false
+          reorder: false
+    p2_color:
+      name: Printer 2 - color
+      default:
+      - 0
+      - 255
+      - 0
+      selector:
+        color_rgb: {}
+    p3_status:
+      name: Printer 3 - status (optional)
+      default: ''
+      selector:
+        entity:
+          domain:
+          - sensor
+          multiple: false
+          reorder: false
+    p3_progress:
+      name: Printer 3 - progress (%) (optional)
+      default: ''
+      selector:
+        entity:
+          domain:
+          - sensor
+          multiple: false
+          reorder: false
+    p3_color:
+      name: Printer 3 - color
+      default:
+      - 255
+      - 0
+      - 0
+      selector:
+        color_rgb: {}
+    p4_status:
+      name: Printer 4 - status (optional)
+      default: ''
+      selector:
+        entity:
+          domain:
+          - sensor
+          multiple: false
+          reorder: false
+    p4_progress:
+      name: Printer 4 - progress (%) (optional)
+      default: ''
+      selector:
+        entity:
+          domain:
+          - sensor
+          multiple: false
+          reorder: false
+    p4_color:
+      name: Printer 4 - color
+      default:
+      - 255
+      - 255
+      - 0
+      selector:
+        color_rgb: {}
+mode: restart
+max_exceeded: silent
+trigger_variables:
+  inactive_states: !input inactive_states
+  s1: !input p1_status
+  s2: !input p2_status
+  s3: !input p3_status
+  s4: !input p4_status
+  status_entities: '{{ [s1, s2, s3, s4] | select | list }}'
+variables:
+  inactive_states: !input inactive_states
+  idle_preset_entity: !input idle_preset_entity
+  idle_preset_name: !input idle_preset_name
+  idle_effect: !input idle_effect
+  s1: !input p1_status
+  s2: !input p2_status
+  s3: !input p3_status
+  s4: !input p4_status
+  pr1: !input p1_progress
+  pr2: !input p2_progress
+  pr3: !input p3_progress
+  pr4: !input p4_progress
+  c1: !input p1_color
+  c2: !input p2_color
+  c3: !input p3_color
+  c4: !input p4_color
+  printers: "{{ [\n  {'status': s1, 'progress': pr1, 'color': c1},\n  {'status': s2,
+    'progress': pr2, 'color': c2},\n  {'status': s3, 'progress': pr3, 'color': c3},\n
+    \ {'status': s4, 'progress': pr4, 'color': c4}\n] | selectattr('status') | list
+    }}"
 triggers:
-  - entity_id: sensor.p2s_22e8ba570400048_druckfortschritt
+- trigger: template
-    trigger: state
+  value_template: '{{ status_entities | map(''states'') | reject(''in'', inactive_states)
+    | list | count> 0 }}'
+- trigger: template
+  value_template: '{{ status_entities | map(''states'') | reject(''in'', inactive_states)
+    | list | count == 0 }}'
+- trigger: homeassistant
+  event: start
 actions:
-  - data:
+- repeat:
-      ix: "{{ ix }}"
+    while:
-    action: rest_command.wled_segment_percent
+    - condition: template
-mode: restart
+      value_template: '{{ printers | map(attribute=''status'') | map(''states'') |
-variables:
+        reject(''in'', inactive_states) | list | count> 0 }}'
-  ix: "{{ states('sensor.p2s_22e8ba570400048_druckfortschritt') | int }}"
+    sequence:
+    - repeat:
+        for_each: '{{ printers }}'
+        sequence:
+        - if:
+          - condition: template
+            value_template: '{{ states(repeat.item.status) not in inactive_states
+              }}'
+          then:
+          - action: number.set_value
+            target:
+              entity_id: !input intensity_entity
+            data:
+              value: '{{ [[states(repeat.item.progress) | float(0) | int, 0] | max,
+] | min }}'
+          - action: light.turn_on
+            target:
+              entity_id: !input segment_light
+            data:
+              effect: Percent
+              rgb_color: '{{ repeat.item.color }}'
+          - delay:
+              seconds: !input interval
+- choose:
+  - conditions:
+    - condition: template
+      value_template: '{{ idle_preset_entity != '''' and idle_preset_name != ''''
+        }}'
+    sequence:
+    - action: select.select_option
+      target:
+        entity_id: '{{ idle_preset_entity }}'
+      data:
+        option: '{{ idle_preset_name }}'
+  - conditions:
+    - condition: template
+      value_template: '{{ idle_effect != '''' }}'
+    sequence:
+    - action: light.turn_on
+      target:
+        entity_id: !input segment_light
+      data:
+        effect: '{{ idle_effect }}'
+  default:
+  - action: light.turn_off
+    target:
+      entity_id: !input segment_light
 </code>

Werkzeuge

Navigationsmenüs und Suche

Wikiübergreifende Schnellsuche

Seitenstatus

Standortanzeiger

Seiten-Werkzeuge

Metainformationen zur Seite

Unterschiede